Bright-Cut inside Bezel setting
- Description
This video shows just how the bright-cutting procedure is accomplished. I use only one tool, my "Onglette #2, Right-Sided" graver.
It is formed & shaped on a bench-grinder…just for this sole purpose.
During this video, you will see the inner bezel-wall of silver being carefully cut. Then afterwards the minor clean-up post cutting! - AuthorGerry Lewy
With over 40 years experience as a stone setter, Gerry Lewy is known throughout the diamond setting community. Gerry started his 9-year apprenticeship with a jewelry manufacturer and tutored by a gentleman ‘setter’, in Haddon Gardens, London. Gerry has redeveloped himself into more than a master setter, his purpose is now to be a teacher of the art as well.
You assume all responsibility and risk for the use of the safety resources available on or through this web page. The International Gem Society LLC does not assume any liability for the materials, information and opinions provided on, or available through, this web page. No advice or information provided by this website shall create any warranty. Reliance on such advice, information or the content of this web page is solely at your own risk, including without limitation any safety guidelines, resources or precautions, or any other information related to safety that may be available on or through this web page. The International Gem Society LLC disclaims any liability for injury, death or damages resulting from the use thereof.