DIY Pulse arc welder
I'm busy designing a Pulse arc welder that can be used by jewelers to weld all kinds of metals together. It will be a DIY project and a welder that can be build for much less than the welders out there. For more info and for support on this project please go to http://pulsearcwelder.blogspot.com
You assume all responsibility and risk for the use of the safety resources available on or through this web page. The International Gem Society LLC does not assume any liability for the materials, information and opinions provided on, or available through, this web page. No advice or information provided by this website shall create any warranty. Reliance on such advice, information or the content of this web page is solely at your own risk, including without limitation any safety guidelines, resources or precautions, or any other information related to safety that may be available on or through this web page. The International Gem Society LLC disclaims any liability for injury, death or damages resulting from the use thereof.