Daniel and Jurgen discuss platinum alloys – Part 1
One fine day at Fine Gold in Ontario, CA, Daniel Ballard (PMWest) and Jurgen Maerz (Dir technical education- Platinum Guild) were doing some test castings at Fine Gold. They were both doing "high speed" three hour wax to cast work. But a two hour burnout still leaves some downtime. So Jurgen and Daniel decided to have an informal chat expressing personal opinions on Platinum alloys and rhodium plating. We just had to put that on tape. It ran long enough to split into two parts for easy viewing on the web. Great information presented for your education. Anyone curious about platinum alloys should see this.
You assume all responsibility and risk for the use of the safety resources available on or through this web page. The International Gem Society LLC does not assume any liability for the materials, information and opinions provided on, or available through, this web page. No advice or information provided by this website shall create any warranty. Reliance on such advice, information or the content of this web page is solely at your own risk, including without limitation any safety guidelines, resources or precautions, or any other information related to safety that may be available on or through this web page. The International Gem Society LLC disclaims any liability for injury, death or damages resulting from the use thereof.