How to Make a Cabochon Ring With Shoulder Collars
- Description
This lesson will take you through the steps of constructing a simple bezel ring for a cabochon stone. There are lots of tips and tricks to help you with accuracy and precision. The techniques can be applied to many other jewelry designs. Also includes how to set the stone and how to make a setting tool.
Lessons Include:
- Part 1 - Bezel ring for cabochon stone - 42 min 36 sec
- Part 2 - Setting a cabochon stone - 11 min 57 sec
- Part 3 - Making a bezel setting tool - 10 min 47 sec
Materials:
- Cabochon stone of your choice.
- Sample = 10mm x 14mm x 3.8mm triplet opal
- Sterling silver 0.5mm thick sheet for stone base = over 12mm x 16mm
- Sterling silver 0.7mm x 3.8mm (over) 40mm for setting wall
- Sterling silver half round wire 2.6mm wide x 2mm thick x (over) 60mm for ring and shoulder collars
- Includes
Purchase also includes these instructional PDF downloads:
- AnnealingSilver.pdf
- Rollinginformation.pdf
- Author
You assume all responsibility and risk for the use of the safety resources available on or through this web page. The International Gem Society LLC does not assume any liability for the materials, information and opinions provided on, or available through, this web page. No advice or information provided by this website shall create any warranty. Reliance on such advice, information or the content of this web page is solely at your own risk, including without limitation any safety guidelines, resources or precautions, or any other information related to safety that may be available on or through this web page. The International Gem Society LLC disclaims any liability for injury, death or damages resulting from the use thereof.