How to Make a Wide-Band Oval Cabochon Ring
This lesson shows how to make a cabochon set ring with a wide band. It is packed full of tricks and tips such as how to shape and solder a setting to a wide shank without over running the solder. There are also some great stone setting tips.
- Part 1 - Oval cabochon ring (Part one) - 45 min 37 sec
- Part 2 - Oval cabochon ring (Part two) - 18 min 24 sec
- Part 3 - Hammer tool tips - 22 min 16 sec
- Plus PDF instructional download
- 8mm x 10mm oval cabochon stone (round stone can be used)
- Sterling silver:
- Strip 1mm x 11mm x 65mm
- Strip 0.6mm x 7mm x 40mm
- Square wire 1mm x 40mm
Purchase also includes these instructional PDF downloads:
You assume all responsibility and risk for the use of the safety resources available on or through this web page. The International Gem Society LLC does not assume any liability for the materials, information and opinions provided on, or available through, this web page. No advice or information provided by this website shall create any warranty. Reliance on such advice, information or the content of this web page is solely at your own risk, including without limitation any safety guidelines, resources or precautions, or any other information related to safety that may be available on or through this web page. The International Gem Society LLC disclaims any liability for injury, death or damages resulting from the use thereof.