[Jewelry making - Article 00222] - Re: [Orchid] Tutorial: Polishing Metals

[Helen Hill]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Haven't they stopped manufacturing the larger wheels? I thought I
    read that a few times. 

    Thanks though. Oh and I did have four of the little pink wheels you
    recommended the other day. They were indeed in the accessory kit that
    came with my Foredom. They're unusual in their feel - very light but
    you're right, they are good. I'm guessing the pink ones are a rougher
    cut than you'd want for a final polish as they didn't get a finish as
    good as either Yellow Dialux (my first cut) or Fabulustre (my second
    cut) and as they're so light I couldn't put much pressure on without
    risk of scratching a piece with the mandrel. I guess it takes a
    different technique to use them? 

Helen
UK
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________