[Jewelry making - Article 00155] - Re: [Orchid] Paste solder tips

[Noel]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     In that case, if say one had medium powder and hard or easy paste,
>     which would prevail? Do you match easy paste with easy powder? 

    I'm sorry, Terrie, I don't understand what you're asking. Easy
    paste, easy powder and easy sheet/wire should all be functionally
    the same-- same for any grade, of course. Different manufacturers'
    formulas may have slightly different melting points, but I choose my
    solder (temperature and form) based on the task, and use one
    interchangably with another of the same grade (temerature). Did I
    cover your question? 

--Noel

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________