[Jewelry making - Article 00085] - Re: [Orchid] CAD/CAM - 3Design vs ArtCam JewelSmith

[Dmitry]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Myron,

    I use "JEWEL CAD" from 1996, I learn this soft. by my self and i have
    no problem. Fast learning curve (2-3 month max.) Visit my web site
    and reed about "JEWEL CAD"at: http://www.doctorjewelcad.com I didn't
    have any experience in computer and CAD/CAM system that time and I
    have bad English. 

    No matter what software you use, matter what you can create with this
    soft. 

    Sorry, my English still not good enough 

regards
Dmitry
(Doctor Jewel Cad)

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________