The Gem and Jewelry World's foremost Resource on The Internet.
  orchid Archives  
  | << December 2004 | January 2005 | February 2005 >> |

This Month Archive Contains 1458 Messages;
Showing 100 headers per page.

    Main Archive Index
Date Index: Page 4  
  << First Page << Prev Page Next Page>> Last Page >> Subject Index
           
 
  • Re: [Orchid] Rockhunting while in Tucson, T.A.Masters
  • Re: [Orchid] Working with Titanium, Bruce Holmgrain
  • Re: [Orchid] Repairing a ring of stones, Bruce Holmgrain
  • Re: [Orchid] Shows and fairs directory, Fishbre396
  • Re: [Orchid] Jewelry import start-up info, Peter Peterson
  • Re: [Orchid] Fire scale Prevention During Vacuum Casting, James McMurray
  • Re: [Orchid] Beaded wire, Trevor F
  • [Orchid] Engraving with Foredom flexible shaft, Mike Levi
  • Re: [Orchid] Do small butane soldering torches work?, jake
  • Re: [Orchid] Heat patina on copper, Marleen B.Berg
  • Re: [Orchid] Do small butane soldering torches work?, John Fetvedt
  • Re: [Orchid] Ruby Vs. Garnet, RING14K
  • Re: [Orchid] [Tucson 2005] Catalog In Motion, Roseann Hanson
  • Re: [Orchid] Dimond trim saw lubricant, Robert
  • Re: [Orchid] The Blue Book for repair prices?, jmfuja
  • Re: [Orchid] Chopard jewelry line?, Roseann Hanson
  • Re: [Orchid] Rockhunting while in Tucson, Roseann Hanson
  • Re: [Orchid] Chinese Turquoise, MillsGem
  • Re: [Orchid] Do small butane soldering torches work?, Dawn Bellemare
  • [Orchid] Stamping Argentium, Grace & Tom Stokes
  • Re: [Orchid] Apprenticeships?, Mary Ann Archer
  • Re: [Orchid] Buying a lathe, KARAT46
  • [Orchid] Tucson show guide, MillsGem
  • Re: [Orchid] Heat patina on copper, Bill Churlik
  • Re: [Orchid] Beaded wire, Len and Judy Bjorkman
  • [Orchid] Another scam?, Barb McLaughlin
  • Re: [Orchid] Drawing 22k wire from coin, andy cooperman
  • Re: [Orchid] [Updated Source] Argentium Sterling Silver, Jim/Mary
  • Re: [Orchid] Learning how to use a lathe, Felice Luftschein and Nicholas Carter
  • Re: [Orchid] Chinese Turquoise, Beverly Jones
  • Re: [Orchid] Tsunami, Monika
  • Re: [Orchid] Chinese Turquoise, TwoSunsTrd
  • Re: [Orchid] Polishing on the flexshaft, Angie C
  • [Orchid] Tip for sorting casting shot by size, Fr. George Aquaro
  • Re: [Orchid] Fire scale Prevention During Vacuum Casting, jkbrennan
  • Re: [Orchid] Shows and fairs directory, David L. Huffman
  • [Orchid] Jewelry Technition opportunities and wages?, vicky calalo
  • Re: [Orchid] Fire scale Prevention During Vacuum Casting, LEESSILVER
  • Re: [Orchid] Shows and fairs directory, Peter Peterson
  • Re: [Orchid] American Jeweler's Institute, Rebecca Ross Russell
  • Re: [Orchid] Do small butane soldering torches work?, Raynancyj
  • Re: [Orchid] Do small butane soldering torches work?, Karen Lechner
  • Re: [Orchid] Working with Titanium, Silverspotstudio
  • Re: [Orchid] Polishing on the Flexshaft, Silverspotstudio
  • Re: [Orchid] Fire scale Prevention During Vacuum Casting, Bruce Holmgrain
  • Re: [Orchid] Coating sterling silver with gold, Bruce Holmgrain
  • Re: [Orchid] Rockhunting while in Tucson, Richard olsen
  • Re: [Orchid] Drawing 22k wire from coin, Stephen Walker
  • Re: [Orchid] Rockhunting while in Tucson, Pat and Maribeth Terry
  • Re: [Orchid] Beaded wire, Gail Smith
  • Re: [Orchid] Chopard jewelry line?, sbright
  • Re: [Orchid] Working with Titanium, Martin Niemeijer
  • Re: [Orchid] Learning how to use a lathe, Silver Mouse
  • Re: [Orchid] Dimond trim saw lubricant, Lee Einer
  • Re: [Orchid] Buying a lathe, The Doctor
  • [Orchid] I found a ring, Jeff Simkins
  • Re: [Orchid] Stamping Argentium, The Doctor
  • [Orchid] Storing acetylene tanks outside, Cernikslc
  • Re: [Orchid] Jewelry import start-up info, Joel Schwalb
  • Re: [Orchid] Jewelry import start-up info, Greg DeMark
  • Re: [Orchid] Heat patina on copper, Joel Schwalb
  • Re: [Orchid] Position for clip-on earrings backs, Greg DeMark
  • Re: [Orchid] How to make liner for stone ring?, Christine Pyman
  • Re: [Orchid] Drawing 22k wire from coin, stevens
  • [Orchid] Filling in dents and scratches, Elkka Nland
  • Re: [Orchid] Engraving on my own, Elkka Nland
  • Re: [Orchid] Beaded wire, Eileen Procter
  • Re: [Orchid] Fire opal question, Jim/Mary
  • Re: [Orchid] [Updated Source] Argentium Sterling Silver, Russell W McColough
  • Re: [Orchid] Jewelry import start-up info, David Barzilay Lord of the Rings
  • [Orchid] Good Corporate behavior, Texeclectic
  • Re: [Orchid] Do small butane soldering torches work?, Marilyn Smith
  • Re: [Orchid] Reducing Watch Band Length, Greg DeMark
  • [Orchid] Cellini's autobiography and Online book resources, Charles Lewton-Brain
  • [Orchid] Carving Ivory, Sumner Silverman
  • [Orchid] [Source] Sterling silver cowrie shell charms, josephinethomas
  • Re: [Orchid] Jewelry Technition opportunities and wages?, Gerald
  • Re: [Orchid] Drawing 22k wire from coin, Silverspotstudio
  • [Orchid] Refilling disposable propane tanks, Texeclectic
  • [Orchid] Re: [Updated Source] Argentium Sterling Silver, Cynthia Eid
  • Re: [Orchid] Jewelry import start-up info, colleen baran
  • Re: [Orchid] Beaded wire, Stephen Walker
  • Re: [Orchid] Dimond trim saw lubricant, Pam Chott
  • Re: [Orchid] American Jeweler's Institute, Gerald
  • Re: [Orchid] How to make liner for stone ring?, Lee Einer
  • Re: [Orchid] Tip for sorting casting shot by size, David Sheard
  • [Orchid] Ferric nitrate mordant for silver, Kay Ivanovic
  • Re: [Orchid] Polishing on the Flexshaft, Pam Chott
  • Re. [Orchid] Stamping Argentium, peter johns
  • Re: [Orchid] Stamping Argentium, Kay Ivanovic
  • Re: [Orchid] Fire scale Prevention During Vacuum Casting, Volpe, Constantino
  • Re: [Orchid] Carving Ivory, Teri Davis
  • Re: [Orchid] Engraving on my own, WADEDESIGNS
  • Re: [Orchid] Introducing Peter G Johns, WADEDESIGNS
  • [Orchid] Harbor Freight Mini Rolling Mill for $190, Bryan Roesner
  • Re: [Orchid] [Updated Source] Argentium Sterling Silver, Christine Pyman
  • Re: [Orchid] Another Scam?, salukibow
  • Re: [Orchid] Fire opal question, Tony Konrath
  • Re: [Orchid] Storing acetylene tanks outside, Karen Bahr
  • Re: [Orchid] Tip for sorting casting shot by size, Dave
  •      
      Click to Visit  
         
      Navigate:  
      << First Page << Prev Page Next Page>> Last Page >>

    Subject Index

    Main Archive Index

      Orchid Resources:  
       Join & Post
     Invite a friend to join Orchid
     F.A.Q
     Galleries
     BenchExchange
     Orchid Message Archives [Subject Index] [Date Index]

    Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

    1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
    2. Add Orchid to myGoogle Add to my Google
    3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
    Support Orchid! - If you believe in what we're doing, you can help!

     
         
         

    © Copyright 1996 - 2008, The Ganoksin Project