[Jewelry making - Article 00067] - Re: [Orchid] Anvil, flexi, polisher

[NatnDan]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    FDJ tools has a polish hood for under 50 bucks. I put  2 inch holes
    on each side behind where the buff wheels are and used 2 inch PVC ,
    then reduced to a size to fit the shop vac hose. I also installed a
    florescent lamp made for under  cabinets , in the top of the hood. 
    Works great. 

Daniel 


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________