========[ Invite a Friend - http://www.ganoksin.com/invite.htm ]========
even more primative and simple is to use common sand. fill the
tubing, fairly tightly, with sand (possibly from a sandblaster) then
pinch or hammer the ends closed, to keep the sand in. then procede
to bend accordingly. one of my professors has shown me this process
when we created our own tubing . it worked extremely well. hope this
helps. Sara in sweaty Savannah, Ga (a lurker finds her voice>
Would you like to reach Members of the Ganoksin Project to educate
them about the wonderful array of supplies, services and products
you have to offer?
Please request a copy of the Ganoksin Media Kit if you would like
more indepth information regarding Ganoksin's advertising services.
Navigate by Topic:
[
