[Jewelry making - Article 00005] - Re: [Orchid] Using Bi-metal

[Beth Rosengard]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>       I have been watching this discussion with interest. RMS does
>     carry a "1/8 22KGF" stamp for our Bi-metal product. It is straight
>     shafted with 1mm letters. Bill 

    Thank you for jumping in on this, Bill!  Why did you wait so long
    :-)?  I knew there was a proper way to stamp bi-metal as gold fill
    but couldn't remember what it was.  Thanks for clarifying. 

Beth
 

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________