|
|
| |
| |
| [222] Detailed Diamond Setting Applications |
What is one of the causes of a "rippling or jagged" effect around an inside cutting edge in a Gypsy or Flush setting? How can this be avoided? When an edge of a cutting tool (of any shape) glances over or hits a facet it will ride above that face. In turn, it will.... (2003)
 Complete Story |
| Show me more articles from: [Gemz]|[Gerald N. Lewy] |
| Releated Categories:[Stone Setting]|[Bench Tips & Tricks] |
|
| [655] Full Bezel Setting for Cabochon Stones |
One of the most basic designs in stone setting is "Bezel Setting". It is so rudimentary in its concept. It is very pleasing to the eye also in its simplicity. This concept blends with the smooth vertical shape of the stone. There are no sharp corners, only gradual flowing lines to conform to the stone. So now let us delve into this different style of setting. A round bur that is re-shaped to have the same contours of the "Cab" stone will enable you to perform and overcome any difficult bezel setting procedure....
(2005)
Complete Story |
| Show me more articles from: [Gemz]|[Gerald N. Lewy] |
| Releated Categories:[Stone Setting] |
|
| [223] Mini Diamond Setting Hints |
When setting a series of diamonds in a row, I use a 156C and just touch the inside wall of the hole. This way each and every diamond will sit at the same level and be correctly placed.... (2003)
Complete Story |
| Show me more articles from: [Gemz]|[Gerald N. Lewy] |
| Releated Categories:[Stone Setting]|[Bench Tips & Tricks] |
|
| [1039] Recycling Worn Out High Speed Steel Burs |
When I buy my high speed steel, 90 degree, under-cutting burs I always think of the words, "waste not, want not". This little phrase has stuck in my mind for many years. If I find that some of my burs are getting past their prime then I examine each of these well used cutting teeth and decide if I should re-sharpen them. Some of my burs are $10.00 to over $15.00 per unit so why throw it away if it´s only slightly worn down?.... (2013)
Complete Story |
| Show me more articles from: [Ganoksin]|[Gerald N. Lewy] |
| Releated Categories:[Stone Setting]|[Customize Your Tools] |
|
| [646] Setting Gemstones in Wax |
The one of the most revolutionary advance in recent years, apart from the Laser soldering, is the method of "Setting Stones in Wax". It has "freed" up many impossible designs and allowing the manufacturer to forge ahead and create many difficult setting projects. Otherwise, that company might have had to re-design their ideas and to have the stones hand set. A jewellery company can now replicate each design with the same degree of accuracy and professionalism.... (2005)
Complete Story |
| Show me more articles from: [Gemz]|[Gerald N. Lewy] |
| Releated Categories:[Stone Setting]|[Wax Working] |
|
|
|
|
|
| |
| |
