If you benefit from what we're doing and want to give something in return, you can make a donation!
The Gem and Jewelry World's foremost Resource
on The Internet. Open to the public, Free of Charge! We are here to build a strong pool of
information for the benefit of Web's jewelers and craftsmen - and those
interested in jewelry and gemstones.
Who has not dreamt of that nobly shaped chalice, enameled all over with immaculate transparents... maybe just one fine gold line winding around its outside... so elegantly understated, so utterly simple... That is poetry. It would neither work nor last. A chalice has to withstand very hard use, and maybe even abuse. It must be carefully planned. That is why I have made this cup a teaching example. [Step by step with illustrations].... (1986) Complete Story
In the late 20s, a small enamel tray, made in China, introduced us to the word cloisonne. The material looked like the granite ware in our kitchen. Obviously the wires were used to keep the colors separated. Then, cloisonne was enamel with wires separating the colors. Simplicity, pure and simple. This is where the majority of the general public leaves the subject, little knowing or caring about its rich history.... (1995) Complete Story
Enamel technique has progressed in a logical and practical direction through the ages, advancing when inspiration, need or new technology permitted. Modern technology has indeed given us new approaches to technique but only from the grounded foundation of knowledge that existed before.... (1993) Complete Story
Interested in illuminating my work and using experimental techniques, I came across copper mesh. There are many kinds of mesh, but only a few are easily obtained without buying in bulk from industrial suppliers. I have been using the 'Impressions' mesh, from American Art Clay Co., with transparent enamels for making plique a jour pieces. The mesh can be purchased from a local craft store or online. There are three varieties available, ranging from dense cloth like mesh , to 1/8 to 1/4 inches diamond shaped expanded mesh.... (2002) Complete Story
Electroforming is the process of controlling the metal deposit from an anode metal, through electrolyte solution, onto an electroconductive surface. Basically, a skin of metal is built up into a rigid structure. The materials you will need to get started are as follows.... (2004) Complete Story
