The Gem and Jewelry World's Foremost Resource on The Internet.
 
   for   in     
Add Ganoksin Power Search to your website
 
| Site Map | Jewelry Making Articles | Orchid Forums & Archives | Members Blogs | Galleries | BenchTube - Jewelry Making Videos |
| The BenchExchange | MetalCalc | Industry Web Sites Guide | Featured Products | Advertising | Contact Us | Link to Us | RSS feeds| More...

  Tips from The jeweler's bench
The Gem and Jewelry World's foremost Resource on The Internet. Open to the public, Free of Charge!
We are here to build a strong pool of information for the benefit of Web's jewelers and craftsmen - and those interested in jewelry and gemstones.
 
     
 
 
 
 
 

Back
Articles by Charles Lewton-Brain
Page: 1 2 3 4 5 6 7 8 9 10  Next
 
[189] Dusts in the Jewelry Workshop
Dust is small particles of a material. There are dusts you can see in the air; these can be breathed in, and because the particles are fairly large, they end up in the upper portions of the lungs. Some can be cleared from the body by its natural mucus where it is bound up, and brought up into the esophagus. From there it is swallowed and so exposes the stomach tissue to whatever chemical was ingested. Jewelry polishers may have elevated rates of stomach cancer as a result of this. With dust in the air, however, it is the smaller, invisible particles that are the most dangerous, and these stay in your lungs.... (2002)
Complete Story

Show me more articles from: [Brain Press Publications]|[Charles Lewton-Brain]
Releated Categories:[Health Hazard]

 

[172] Electroplating rectifier safety thoughts
The "General Safety Rules for Tools" article applies here too, as with all power tools. Read the instruction manuals and directions most carefully. Plating and stripping solutions usually contain cyanides, bases or acids which, if mixed together, are used improperly or carelessly or come in contact with a cyanide plating solution can release hydrogen cyanide gas, which was used by the Nazis in the gas chambers and is still used in gas executions in the United States.... (1998)
Complete Story

Show me more articles from: [The Jewelry Workshop Safety Report]|[Charles Lewton-Brain]
Releated Categories:[Workshop Safety]|[Plating & Electroforming]
ISBN: 0969851049

 

[666] Enameling Safety Issues
Enameling involves the firing and melting of suitable glasses onto and into metals for decorative effects. It is done at fairly high temperatures, from 1200F (649C) to a high kiln temperature of 1700F (927C) or so.The primary dangers involve dusts, the particle size of the enamel used, the chemical constituents of the enamel (older enamels frequently contain lead and other toxic metal oxides and chemicals), the infrared radiation of the kiln and sundry opportunities to burn oneself. Enamelists in factories have even been killed by scalds from water when molten enamel was dumped into it.... (1999)
Complete Story

Show me more articles from: [The Jewelry Workshop Safety Report]|[Charles Lewton-Brain]
Releated Categories:[Workshop Safety]|[Enameling]
ISBN: 0969851049

 

[260] Examples of basic tools in a goldsmith's kit
This article lists the basic tools found in a standard Western Goldsmith's toolbox. (2004)
Complete Story

Show me more articles from: [Brain Press Publications]|[Charles Lewton-Brain]
Releated Categories:[Tools]|[Beginner's Corner]

 

[50] Fabrication of a Basic Tubing Catch
First one chooses an appropriate metal for the various parts, that is a metal with appropriate structural for it's thickness and stress in use. In this catch there is little stress in use and therefore one can use even as soft metal as sterling for the components. In 14k gold one could.... (1991)
Complete Story

Show me more articles from: [Brain Press Publications]|[Charles Lewton-Brain]
Releated Categories:[Hinges & Catches]

 

Page 1 2 3 4 5 6 7 8 9 10  Next