The Gem and Jewelry World's foremost Resource
on The Internet. Open to the public, Free of Charge! We are here to build a strong pool of
information for the benefit of Web's jewelers and craftsmen - and those
interested in jewelry and gemstones.
This paper will describe how to turn a block of wax into a pottery of approximately 1 1/4 inches in diameter and 2 inches tall. The pottery was turned in two pieces. The lower section below the ring below the inlaid stones and the portion above the ring. I have turned wax that is 3 inches thick..... (2006) Complete Story
As you may have noticed (Id be astonished if you hadnt), prices for gold and silver, platinum too, are on the rise. First, a word of advice: Dont panic, it doesnt mean we are going to have to price ourselves out of our markets. Now if only we can convince the customers, who are also privey to the knowledge of rising gold and silver prices, that jewelry is still a good buy.... (2006) Complete Story
I came up with this system to solve some production and prioritizing problems at a small custom jewelry store. We used this system mainly for custom jobs, however it can be adapted for repair or stock production as well.... (2005) Complete Story
Beading tools and dot punches lose their form and become dull as you use them. You can recondition a tool at least ten or twelve times, or you may need a special size, or perfect polish for a particular job. They can be reconditioned fairly easily. The best tool that I have found to do this is the 40 hole.... (2003) Complete Story
This vulcaniser came to me in a poor condition. It would not heat up and had seized because of corrosion. The bodywork around the base was also badly corroded and needed treatment. Having decided this would be a worthwhile restoration, I began researching the makers and identified them as.... (2003) Complete Story
