|
|
| |
| |
| [318] Advanced Etching of Copper, Brass and bronze |
This method of etching uses a prepared ferric chloride solution which also contains hydrochloric acid. This 'etchant' is not a pure acid, but etches copper and copper alloys (like brass and bronze). It will not work on silver. It is available from electronics supply shops, such as Radio Shack or from chemical suppliers. It is generally used to clean or etch copper circuit boards. It can also be found at some printmakers' supply stores.... (2004)
 Complete Story |
| Show me more articles from: [MetalWerx]|[Sandra Noble Goss] |
| Releated Categories:[Etching] |
|
| [317] Introduction to Basic Concrete Jewelry |
Concrete is a wonderful, hard, neutral, unprecious material with a real presence. And it can be successfully adapted to jewellery. This is an introduction to basic processes and materials. Uncured concrete is difficult to handle. It usually needs some kind of form or structure to control the shape. This leads to three completely different fabrication methods.... (2004)
Complete Story |
| Show me more articles from: [MetalWerx]|[Andrew Goss] |
| Releated Categories:[Fabrication] |
|
| [319] Multi-Metal Lamination - aka Metal Overlay |
Multi-metal Lamination is a type of 'faux' married metal which produces a freer, more 'painterly' effect than the hard-edge, highly graphic, married metal. It is a technique in which designs may appear to float over other shapes and patterns. MML may be used in a figurative way or to produce over-all pattern. MML is achieved by layering patterns of different coloured metals on top of a thick base plate. The patterns are soldered onto the surface, and then compressed by passing through a rolling mill. The resulting illusion is of a single piece of metal with patterns of different coloured metals 'inlaid' into the surface..... (2004)
Complete Story |
| Show me more articles from: [MetalWerx]|[Sandra Noble Goss] |
| Releated Categories:[Fabrication]|[Metals] |
|
| [308] Photocopy Transfer Etch |
Etching metal is very simple. It involves a mordant (acid) and a resist to that acid. The resist can take many forms, plastic, vinyl, marking pens, duct tape, nail polish, etc. As long as it resists water, the procedure will work well. With current photocopy technology and computer laser printer technology, you have more flexibility in your designs. These are basically the same techniques as printmakers use with zinc, but with brass, copper or bronze and silver, you have options for additional fabrication choices involving solder or cold connection.... (2004)
Complete Story |
| Show me more articles from: [MetalWerx]|[Karen Christians] |
| Releated Categories:[Etching] |
|
| [316] Soumak as a Metal Technique |
Soumak is a textile technique which is commonly found in the weaving of rugs in the Middle East. The technique has been around for a couple of thousand years and primarily has been used in cloth. As I learned various techniques of weaving in gold and silver, I adopted soumak as my most successful method for creating or enhancing my designs. Some of my creations are totally woven wire, with very little stone work, and others are integrating the weaving with the placement and setting of gemstones.... (2004)
Complete Story |
| Show me more articles from: [MetalWerx]|[Cynthia Downs] |
| Releated Categories:[Wire Working] |
|
|
|
|
|
| |
| |
