Welcome to the Ganoksin Project The Gem and Jewelry World's Foremost Resource on The Internet. Open to the public, Free of Charge! We are here to build a strong pool of information for the benefit of Web's jewelers and craftsmen - and those interested in jewelry and gemstones.
  
  The Gem and Jewelry World's Foremost Resource on The Internet.  
 
   for   in     
Add Ganoksin Power Search to your website 		 
| Site Map | Jewelry Making Articles | Orchid Forums & Archives | Galleries | The BenchExchange | MetalCalc |
| Industry Web Sites Guide | Press Room | Advertising | Contact Us | Link to Us | More...

 		 
  Tips from The jeweler's bench
The Gem and Jewelry World's foremost Resource on The Internet. Open to the public, Free of Charge!
We are here to build a strong pool of information for the benefit of Web's jewelers and craftsmen - and those interested in jewelry and gemstones.		  
     
 
 
Advertise Here!
 
 
 
 

Back
Articles by wojtkielo@comcast.net
Page: 1 
 
[425] Working with Topaz
The primary issue with topaz that must be remembered at the bench is its one perfect cleavage direction. Hammering or putting pressure on a topaz runs the risk of cleaving the stone into pieces. Routine stone tightening on a prong set topaz can result in cleaving the stone. Setting a topaz in prongs presents a greater risk than tightening. To minimize the risk, avoid alloys that are very hard, as well as overly thick prongs. Cut stone seats with care and smooth away any burrs left by tools.... (2004)
Complete Story

Show me more articles from: [AJM]|[wojtkielo@comcast.net]
Releated Categories:[Gemstones Information]|[Bench Tips & Tricks]
ISBN: B00006K39S

 

Page 1 
 
  © Copyright 1996 - 2008, The Ganoksin Project
  
Welcome to the Ganoksin Project The Gem and Jewelry World's foremost Resource on The Internet. Open to the public, Free of Charge! We are here to build a strong pool of information for the benefit of Web's jewelers and craftsmen - and those interested in jewelry and gemstones. | Site Map | Jewelry Making Articles | Orchid Forums & Archives | Galleries | The BenchExchange | MetalCalc |
| Industry Web Sites Guide | Press Room | Advertising | Contact Us | Link to Us | More...