I have found this to be a most useful tool to use when rebuilding a bezel using a Laser Welder. It is made from a watchmakers screwdriver and is used to deflect the excess energy reflected at a sensitive stone to prevent damage to the stones surface. This view of the finished product shows 1.5mm X 2mm piece of fine silver welded to the blade tip.... (2005) Complete Story
These pliers are used to pull back bezels on channel set rings. This allows you to drop in the stones without thinning the edge to allow the stone to drop in. It works especially well with the continuous channel method that the all-set tool creates. Mark the bottom jaws about 0.25 in from the end.... (2012) Complete Story
These tweezers are great for gripping melee when you slide then into position in continuous channel setting jobs. Here you see the very fine tips on these tweezers.... (2012) Complete Story
These tweezers are great for gripping melee when straight tips don´t give you enough clearance. They allow you to slide melee down the channel without loosing your grip.... (2012) Complete Story
Would you like to reach Members of the Ganoksin Project to educate
them about the wonderful array of supplies, services and products
you have to offer?
Please request a copy of the Ganoksin Media Kit if you would like
more indepth information regarding Ganoksin's advertising services.
