The Gem and Jewelry World's foremost Resource
on The Internet. Open to the public, Free of Charge! We are here to build a strong pool of
information for the benefit of Web's jewelers and craftsmen - and those
interested in jewelry and gemstones.
This article is a set of predictions for what the jewelers bench and workshop will experience in technological change in the future.... (2007) Complete Story
Pitch is used all over the world by goldsmiths and silversmiths to hold metal in place while working it with hammers, punches or chisels. It should be hard enough to fill the requirements of the chasing work done on it. Most chasers will therefore have several hardnesses available, a soft one for deep forming, a medium for regular work and a hard for planishing on. In the old days chasers would even have summer and winter formulations.... (1998) Complete Story
Besides the safety instructions that you get from a tool manufacturer in the tool manual it may be necessary for you to write your own sets of rules up to keep you out of trouble. This is especially important with employees. What follows is an example of thinking about what can go wrong with a tool. The tool used as an example is a mounted grinder. You can do the same sort of rule compilation with all the tools in your shop. See the "General Safety Rules for Tools" article as a starting point, then each tool will have certain idiosyncrasies which need to be noted. Think of it as "What advice would I give to someone to keep them out ot trouble on this machine?".... (1998) Complete Story
Hammers are an essential part of silversmithing and goldsmithing. While one can buy hammers ready made one can also do a lot with home-made versions and adaptations. Ordinary hammer heads may be reshaped providing they have not been cast. Reshaping....
(1994) Complete Story
Often craftspeople start out making craft objects in their living space, a kitchen, a living room, and sometimes continue working in them even when they have grown to the point that they need a separate studio. It is not wise to share one's living and family space with workshop space. Usually there are chemicals, tools, equipment, processes, sounds, materials, wastes, dusts and so on that are unhealthy to be exposed to that are produced in a work shop.... (2000) Complete Story
| More...
