The Gem and Jewelry World's foremost Resource
on The Internet. Open to the public, Free of Charge! We are here to build a strong pool of
information for the benefit of Web's jewelers and craftsmen - and those
interested in jewelry and gemstones.
Extremely clean metal surfaces give better results. See the article on Cleaning metal Surfaces for more information on cleaning.... (1995) Complete Story
Making jewelry is sometimes seen as a difficult or an expensive proposition. In reality a basic metal working shop can be set up quite inexpensively. Cutting (separating materials), soldered construction and finishing are the three main things that jewellers do and what follows is a list of basic tools for doing these things. One should be able to set up a basic shop for less than a hundred dollars.... (1994) Complete Story
As well as being used for chasing they may also be used as punches to make textures. A stamp or texturing punch can be struck onto an annealed blank tool to get a negative impressions of its end. Each texturing tool can then produce its own negative. These blanks in turn are then hardened and tempered. It is wise to always wear goggles when using punches of any kind.... (1994) Complete Story
A good selection of burs may be had from your dentist. Dentists often throw out burrs which still have a reasonable life left in them for a jeweller. The same goes for the probes and other tools. Some dentists are nervous about giving tools away.... (1997) Complete Story
These pages contain a list of recommended tools to jewelry rendering, as well as a series of projects that I have used in classes. You could construct your own 'self-study' course using them.... (1998) Complete Story
