How to Make a Traditional 3-Stone Ring
- Description
During this course you will learn how to construct a classic three stone ring with a focus on spacing the stones correctly. This project has some excellent tips for fixing settings perfectly straight and forming open slot bezel settings.
The soldering tasks were all completed using a gas only Orca torch, proving that a professional mini torch is not essential for some advanced projects.
This lesson includes three videos.
- Part 1 - Three stone ring (part one) - 54 min 22 sec
- Part 2 - Three stone ring (part two) - 32 min 22 sec
- Part 3 - Three stone ring (part three) - 38 min 13 sec
- Part 4 - Three stone ring (round stones) - 21 min 26 sec
Materials:
- Oval faceted stone 9mm x 7mm & 2 x round faceted 4.75mm stones
- Stock gauge silver 4.5mm x 4.5mm x 65mm or 9.5 grams
- Includes
Purchase also includes these instructional PDF downloads:
- Flyer_A5_AGPD.pdf
- Author
You assume all responsibility and risk for the use of the safety resources available on or through this web page. The International Gem Society LLC does not assume any liability for the materials, information and opinions provided on, or available through, this web page. No advice or information provided by this website shall create any warranty. Reliance on such advice, information or the content of this web page is solely at your own risk, including without limitation any safety guidelines, resources or precautions, or any other information related to safety that may be available on or through this web page. The International Gem Society LLC disclaims any liability for injury, death or damages resulting from the use thereof.