How to Make a Four V Claw Solitaire Ring
- Description
This demonstration shows a simple way to make a commercial solitaire ring using three components and the slot fixing technique. Included is a simple tapered band video and a setting video using just a piercing saw to carve the seating.
This is a great project for the adventurous beginner.
Lessons Include:
- Part 1 - Four V claw solitaire - 54 min 9 sec
- Part 2 - Simple tapered band - 21 min 20 sec
Materials:
- Round Garnet or similar; 6.5mm
- Sterling silver square wire;
- 2mm x 2mm x 70mm & 3.2 x 3.2mm x 35mm
- Author
You assume all responsibility and risk for the use of the safety resources available on or through this web page. The International Gem Society LLC does not assume any liability for the materials, information and opinions provided on, or available through, this web page. No advice or information provided by this website shall create any warranty. Reliance on such advice, information or the content of this web page is solely at your own risk, including without limitation any safety guidelines, resources or precautions, or any other information related to safety that may be available on or through this web page. The International Gem Society LLC disclaims any liability for injury, death or damages resulting from the use thereof.