How to Make a Cabochon Cocktail Ring

HomeLearning CenterJewelry MakingHow to Make a Cabochon Cocktail Ring
  • Description

    In this lesson you will learn how to make a wrap around ring for a cabochon stone dressed with faceted shoulder stones for appeal. Once you watch the video you will see that you can modify and change the design slightly to give it a bit of your own personality.

    This lesson includes three videos.

    • Part 1 - Cabochon dress ring - 55 min 45 sec
    • Part 2 - Three claw settings - 29 min 38 sec
    • Part 3 - How to make chenier tube - 12 min 23 sec
    • Plus PDF instructional download

    Materials:

    • Cabochon stone (approximate size 12mm x 8mm)
    • 2 x 3mm round faceted stones
    • Tube with the same outside diameter
    • Sterling silver 1.2mm round  wire x 80mm (this can be drawn down to 1mm)
    • Sterling silver strip 3.2mm x 1.6mm x 80mm
  • Includes

    Purchase also includes these instructional PDF downloads:

    • Makingchenier.pdf
  • Author

You assume all responsibility and risk for the use of the safety resources available on or through this web page. The International Gem Society LLC does not assume any liability for the materials, information and opinions provided on, or available through, this web page. No advice or information provided by this website shall create any warranty. Reliance on such advice, information or the content of this web page is solely at your own risk, including without limitation any safety guidelines, resources or precautions, or any other information related to safety that may be available on or through this web page. The International Gem Society LLC disclaims any liability for injury, death or damages resulting from the use thereof.