five stone pendantfive stone pendant

5-Stone Vertical Bar Necklace Pendant

HomeLearning CenterJewelry MakingAll Premium Videos5-Stone Vertical Bar Necklace Pendant
  • Description

    This lesson will show you a really simple way to make a row of claw settings. The lesson includes instructions on how to hold settings without damaging them as well as how to set the pendant. There are also information handouts and two additional videos on how to make a setting tool and how to make chenier tube.

    This lesson includes three videos:

    • Part 1 - Five Stone Pendant - 41 min 23 sec
    • Part 2 - Enlarged beader - 5 min 20 sec
    • Part 3 - Making chenier tube - 12 min 23 sec
    • Plus two PDF instructional downloads


    • Round CZ's x 5
    • Chenier tube (silver or brass) 4mm O/D x 0.5mm thick x 40mm long
    • Sterling silver round wire 1mm x 120mm
  • Includes

    Purchase also includes these instructional PDF downloads:

    • Steeltoolmaking.pdf
    • Makingcheniertube.pdf
  • Author

You assume all responsibility and risk for the use of the safety resources available on or through this web page. The International Gem Society LLC does not assume any liability for the materials, information and opinions provided on, or available through, this web page. No advice or information provided by this website shall create any warranty. Reliance on such advice, information or the content of this web page is solely at your own risk, including without limitation any safety guidelines, resources or precautions, or any other information related to safety that may be available on or through this web page. The International Gem Society LLC disclaims any liability for injury, death or damages resulting from the use thereof.