3-Stone Bezel Setting Ring
- Description
During this course you will learn how to create bezel settings with a 10 degree angle. They will then be fixed to create an overlap so that there are minimal gaps once it is stone set. There are lots of industry techniques that will be revealed in this detailed lesson as well as many more tricks of the trade. This course does not require an expensive roll mill as Peter will demonstrate traditional forging methods.
This lesson includes three videos:
- Part 1 - Bezel set three stone ring (Part one) - 52 min 58 sec
- Part 2 - Bezel set three stone ring (Part two) - 25 min 4 sec
Materials:
- 6.5mm round CZ & 2 x 5mm Round CZ's
- Sterling silver strip 1.1mm x 6mm x 55mm & square wire 2.8mm x 50mm
- Author
You assume all responsibility and risk for the use of the safety resources available on or through this web page. The International Gem Society LLC does not assume any liability for the materials, information and opinions provided on, or available through, this web page. No advice or information provided by this website shall create any warranty. Reliance on such advice, information or the content of this web page is solely at your own risk, including without limitation any safety guidelines, resources or precautions, or any other information related to safety that may be available on or through this web page. The International Gem Society LLC disclaims any liability for injury, death or damages resulting from the use thereof.