========[ Invite a Friend - http://www.ganoksin.com/invite.htm ]========
> Now I'm trying to figure out how to make a reservoir
> (camelback?? is that what they call it??) nib for the thing. >
What about closing one end of a tube to make the reservoir,
soldering it side by side to the copper wire nib, then drilling
an appropriately sized hole in the base of the "reservoir" next
to the nib? Or drill the base to permit passing a split or
grooved nib wire down through the reservoir base, leaving the
groove unsoldered so the heated wax will feed down the wire? The
wax would be heated to the right working temperature by the nib
directly in this way, rather than by conducted heat which my
first suggestion would require.
I can't work wax worth a hoot, but your reservoir idea sounds good to me.
Good luck.
Pam
Would you like to reach Members of the Ganoksin Project to educate
them about the wonderful array of supplies, services and products
you have to offer?
Please request a copy of the Ganoksin Media Kit if you would like
more indepth information regarding Ganoksin's advertising services.
Navigate by Topic:
[
