========[ Invite a Friend - http://www.ganoksin.com/invite.htm ]========
George..........It only seems hard but like most other things it
is really quiteeasy.
You've domed a square plate. The next step is to place the
square plate on your bench top, with a straight side parallel to
the edge of your bench and overhanging the benchtop slightly. Now
with a wooden (or Other ) mallet strike the overhang. the metal
will change its shape towards flat at the edge. you may have to
hit it maor than once depending on how hard its and how hard you
hit it the first time. Also depending on how big the square is
you may have to hit it in seversl places along the length of each
side. Once you've got one side flat rotate the piece and do the
adjacent side. Its really a piece of cake.
Sol K.
Would you like to reach Members of the Ganoksin Project to educate
them about the wonderful array of supplies, services and products
you have to offer?
Please request a copy of the Ganoksin Media Kit if you would like
more indepth information regarding Ganoksin's advertising services.
Navigate by Topic:
[
