[Jewelry making - Article 00121] - Re: [Orchid] linking loop-in-loop chain sections

[scott blackman]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    mary, after struggling with many loop in loop chains ( i like to
    call them roman chain, sounds better ) there is no real way to
    repair right in the middle. if it's not too far back just reweave
    it . if it is too far back make some nice terminals on each end
    and link them. it gives it a nice decorative affect. why are you
    scribing after the chain is made ? you should use the scribe at
    the point of weaving. then to true up the weave use a hard wood
    drawplate. email me if you have any more questions. scott i
    hotlanta 

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________