[Jewelry making - Article 00041] - Re: [Orchid] linking loop-in-loop chain sections

[David D. Arens]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


Hi Mary,

    Now's when you really learn how to solder! 

    The way I handle this situation is to position the broken link
    so you have access to the break. Sometimes this requires that the
    broken link and 1 or 2 on each side be deformed a bit. If the
    joins in the adjacent links are not in close proximity  to the
    link to be repaired, apply paste solder (use 'easy' or low temp
    solder) to the joint & solder. Keep the heat away from the other
    links as much as possible. 

    If there are other joints in close proximity, you can paint the
    chain in that area with white out correction fluid or mix a
    slurry of casting investment or plaster of paris & paint it on
    the adjacent links. Again, apply paste solder to the link to be
    repaired  & solder after the painted on stuff has dried. After
    soldering remove the painted on stuff with water, then pickle the
    chain. Reshape any links that were deformed in the repair
    process. 

Good luck!

Dave


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________