[Jewelry making - Article 00019] - Re: [Orchid] Casting temperature for non-tarnishing silver

[Michael Mathews]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>         I will be casting the non-tarnishing silver in a weeks
>     time. My question for this metal is what casting temperature is
>     being used for this metal. 

    Hello Surbhi:    If you mean that new "Antifirescale" silver, my
    info. says cast at normal flask temp for silver 880-850 degrees
    F. Flow point of this metal is 1650 degrees F This information was
    taken from my Rio Grande catalog. 

Michael Mathews    Victoria,Texas   USA
http://www.geocities.com/Colosseum/Loge/9493/orchidlist.html
Search Jewelry related web sites including many from Orchid members here.

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________