[Jewelry making - Article 00018] - Re: [Orchid] [Techniques] Photoetching

[Donna Wilson]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Another good heat source for adhering PnP Blue Resist is to get
    a waffle iron with flat plates on one side, then put the metal
    on the flat  plate and heat (you will need to experiment with
    temperatures but have found that light waffle works best on
    mine) with the PnP Blue face down on the metal.  I usually start
    in the center of the Blue and stroke towards the edges with a
    piece of cut-off illustration board or matt board while the
    piece begins to heat.  I have never had air bubbles using this
    method. 

Donna in WY      

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________