========[ Invite a Friend - http://www.ganoksin.com/invite.htm ]========
Yep! I'm new at this as I'm sure my following question will
prove, but any suggestions you can offer will be really
appreciated! I'm making some earrings out of square wire and 26g.
sheet.(sterling) After soldering, I used 280 grit emery paper
on the sheet and then polished with tripoli, white diamond and
fabulustre (in that order). I keep thinking the fine scratches
would polish out, but...... I have figured out that I SHOULD have
used some finer emery paper, but since I didn't, I'm wondering if
there's anything that can be done without repeating the entire
process. I was trying to achieve a mirror finish. Not only am I
feeling too lazy to repeat the whole deal, but the thin gauge of
the sheet has me a little nervous as well.
Thanks!
Mollie
marnette AT citcom.net
Would you like to reach Members of the Ganoksin Project to educate
them about the wonderful array of supplies, services and products
you have to offer?
Please request a copy of the Ganoksin Media Kit if you would like
more indepth information regarding Ganoksin's advertising services.
Navigate by Topic:
[
