[Jewelry making - Article 00056] - Re: Photoetch

[Richard D. Hamilton, Jr (Rick)]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    I used International Etching in Providence for a progam of designs this
    past fall. They will etch their metal or yours in 4x12, 6x12, and 12x12
    inch sheets. The pieces we did were oval (5 sizes, 5/8 to 1 1/4 long axis)
    and cost roughly $3 each after initial art charges, but including metal
    (16 g sterling). They redid the tool once because they were not happy with
    the result- before they shipped anything to us. We were happy with the
    results.

Rick Hamilton
Richard D. Hamilton, Jr
<http://www.rick-hamilton.com>
dunstan AT vineyard.net


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________