The Ganoksin Project - Jewelry Manufacturing Methods and Techniques - Since 1996
You Are Here: Home -> Orchid Forums -> Message Archive | << May 2011 | June 2011 | July 2011 >> |


Come and join your fellow jewelers on Facebook
Donate!
If you believe in what we're doing, you can help!
Orchid Message Archives
Re: [Orchid] Selecting power assisted hand engravers
-> Navigate by Topic: [Thread Prev] [Thread Next]
-> Navigate by Date: [Message Prev] [Message Next]
-> Locate this message on the Date Tree or Thread Tree

Keith Hible Wednesday, June 01, 2011
    
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Marie,

    While following this thread, I was once again inspired to visit one
    of my engraving forums at http://www.ganoksin.com/gnkurl/mc 

    This site is run by Steve Lindsay. You can network with forum members
    in your area so you can see a Lindsay AirGraver or PalmControl in
    action. The AirGraver is in the same class of tools as the
    GraverMach. Thought you might be interested in watching some of the
    videos, There are 11 Hours worth of them available to be viewed for
    free at: 

    http://www.ganoksin.com/gnkurl/rg 

    I am humbled when I look at the power assisted engraving there.
    HOURS of loving, painstaking craftsmanship. 

    Everyone has to have someone to inspire assimilation! 

Keith Hible
www.masterjeweler.net
Click to Visit

--Back to Top--

Bookmark and Share Printer View Printer View
Navigate:
Orchid Resources:

 
Donate! If you believe in what we're doing, you can help!
© Copyright 1996 - 2013, The Ganoksin Project
Home