========[ Invite a Friend - http://www.ganoksin.com/invite.htm ]========
Everyone now and then Fred's puts their tables on sale. They have
foldable 6' tables, 4' tables, and card tables. If you want them
taller you use cpvc, measured to where the table leg makes an angle,
add the height, then at the bottom you can either put a cap -or- you
can put a 90 degree bend and link the two end legs. For more
stability, you could use a three way link and link all the leg pieces
at the bottom. IF you are on uneven terrain, though, it would
probably be best to just use a cap. You have to make sure the cpvc
you use is not much wider than the diameter of the table leg or else
the table can be a little loose. One note, if you use different style
tables, mark which cpvc poles go with which table.
For the table cloth, you can either make one (or buy) that hangs
completely from the top -or- you can fasten velcro to the table and
make a hidden area of tablecloth to hang underneath the top
tablecloth. That way you will have tablecloth to the ground, without
paying a fortune on a custom tablecloth. This could easily be
accomplished with a $9 black flat sheet from Wal-Mart and some
velcro. Cut the sheet and hem (or use adhesive hem tape), to the
height you need. Add the velcro to where you need it. I'd sew those
on for strength. Use several so it doesn't sag. Then you can get the
$10 tablecloth Wal-Mart sells, 104". Put that on top.
My thoughts.
Val
Would you like to reach Members of the Ganoksin Project to educate
them about the wonderful array of supplies, services and products
you have to offer?
Please request a copy of the Ganoksin Media Kit if you would like
more indepth information regarding Ganoksin's advertising services.
Navigate by Topic:
[
