The Ganoksin Project - Jewelry Manufacturing Methods and Techniques - Since 1996
You Are Here: Home -> Orchid Forums -> Message Archive | << February 2011 | March 2011 | April 2011 >> |


Come and join your fellow jewelers on Facebook
Donate!
If you believe in what we're doing, you can help!
Orchid Message Archives
[Orchid] New 5 inch knew concept saw problem
-> Navigate by Topic: [Thread Prev] [Thread Next]
-> Navigate by Date: [Message Prev] [Message Next]
-> Locate this message on the Date Tree or Thread Tree

gloria lenon Saturday, March 26, 2011
    
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Hi all, and I hope that Lee is wandering around here somewhere. I am
    having a big problem with the redesigned 5" Knew Concept saw. I am
    unable to tighten the tension enough to get my saw blade tight enough
    to saw! I have tried everything I can think of, i.e. reversing the
    screw in the top, taking it apart and putting it back together again.
    The blade is the correct size, so shortening it will not help. To me,
    it seems like a design flaw that does not allow it to tension
    properly. Is there an answer to this? Is anyone else having a problem
    with it? I have a 3" saw with the spring tension adjustment and have
    no problem with that one. 

Gloria Lenon
Click to Visit

--Back to Top--

Bookmark and Share Printer View Printer View
Navigate:
Orchid Resources:

 
Donate! If you believe in what we're doing, you can help!
© Copyright 1996 - 2013, The Ganoksin Project
Home