The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Bending resin inlay bracelet  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Celeste
Date: Sat Jul 26 22:30:02 2008
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    If you are committed to this design you have a few options. 

    1. fabricate it already bent which I think you said you tried and it
    was too difficult--keep trying. If you had access to a laser you
    could tack it together and then solder but I assume you don't. You
    might be able to make a mold to solder it over out of soft
    firebrick, investment, or a special clay made for this that welders
    use but I don't know where to get it or what its called. 

    2. Form a solid stucture for your bracelet for the outside and the
    important parts by soldering, then glue the rest of your design
    within using clear resin or epoxy if compatible (test!) then when
    that is dry apply your colored resins so that there is solid resin
    with parts floating or imbedded with a sturdy structure 

    3. Carve it or cad model in wax and cast it. I just saw a filigree
    bracelet with flush settings that was cadded and cast and came out
    beautiful. expensive if you can't do it yourself, but that is your
    best option 

    Whatever you do, make sure you have some kind of "key" which is an
    undercut, or gouged up area on your metal walls to give your resin
    something to grip to so that it is not as likely to fall out. 

    Also make this thing plenty sturdy because people flex cuff
    bracelets putting them on and your resin could break. They will even
    play with a cuff bracelet to see how springy it is, they do it every
    time, show them a cuff bracelet and they start flexing it. So a cuff
    must either flex well or be completely rigid to withstand this. 

    I hope you are prepared to repair it. 

Celeste
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project