[Jewelry making - Article 01108] - Re: [Orchid] Sawdust and plastic behind stones...

[Wayne Emery]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Kevin,

    Yes, that my statement originally. And, yes, I was speaking about
    solid-backed bezels. The Permatex is a thick liquid, squeezed out of
    a tube. I use enough to create a layer about 1/16th to 1/8th inch
    thick in the bttom of the bezel cup, then press the stone slightly
    into it and allow it to dry overnight before closing the bezel. The
    Permatex is designed to be used as a liquid gasket on engine blocks,
    so it will withstand considerable heat, is impervious to oil, water,
    alcohol, and will not break down in the ultrasonic. It absorbs shock
    well and I have found it ideal for shock sensitive materials. 

Wayne
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________