[Jewelry making - Article 00105] - Re: [Orchid] Drusy quartz discoloration

[Diane]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Amery: Sounds like the drusy was coated with Titanium. That would
    account for the iridescent shimmer. 

    I don't recommend that Titanium coated drusy be  steamed or cleaned
    in the ultrasonic. Your piece should be  completely polished and
    ready for setting so that only a touch up with the  flex shaft is
    done if necessary, Be very careful to avoid getting  polishing
    compound on the drusy.  I also don't recommend these be used  in
    rings (my personal opinion). The less exposure to wear and tear the 
    better.

Diane
Dikra Gem Inc.
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________