[Jewelry making - Article 00074] - Re: [Orchid] Methacrylate for hydraulic press

[frank goss]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Helen my experience with a hydraulic press was not good using plexi
    (either one) i found that micarta or phenolic work much better as
    neither seems to break or crack or deform as easily as plexi. Check
    with your local plastics supplier and see what they have to say. 

Frank Goss
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________