[Jewelry making - Article 00644] - Re: [Orchid] Cleverwerx soldering set

[Karen Christians]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     As you now have learned, it's better to jump out of the way & let
>     it fall where it may, then risk either quickly grabbing the wrong
>     end, or having that wrong end land on your leg! It's now an
>     involuntary reaction of mine to jump out of the way when my solder
>     pick starts rolling to the edge of my bench, or drops from my hand
>     off the bench for some reason. 

    Take a look at the image of my soldering pick. It doesn't roll,
    there is no worry which end you need to heat up and you can apply
    pressure while it is hot without bending. 

-k
Karen Christians
Waltham, MA
http:www.cleverwerx.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________