[Jewelry making - Article 00545] - Re: [Orchid] Which mill accept patterned rollers

[R . E . Rourke]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Rosenthal's has a number of brands that are manual and accept many
    patterned rollers (i believe Rosenthal's offers more patterned
    rollers than any other US vendor..and they outsource custom made
    rollers based on an individual's requests and designs as well for
    about 50-75 bucks each..last time I bought one)..I think Karat mills
    take the rollers they offer, PEPE doesn't take em, and some Durston
    models take em- but you must remember to get a good digital angle
    finder and reset the rollers exactly as they are when running
    perfectly when you begin changing them frequently-or even
    infrequently..it means the difference in time of having to constantly
    anneal and work out ripples or skewing compared to learning your
    mill's proper setting to insure absolute planes and perfectly
    calibrated gear ratio...rer
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________