[Jewelry making - Article 00528] - Re: [Orchid] Resin pulling away from the bezel walls

[Kevin P. Kelly]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Firstly, I have not used 'colores'. I do have some experience with
    resins. 

    My suggestions don't use a heat lamp allow the resin to cure at
    normal temps. You mention that you live in an arid climate; get a
    humidfier. It is my understanding that resins require humidity to
    properly cure (normal levels of humidity). 

    On the other hand I could be totally wrong.

    Just out of curiosity: Do the directions you received with 'Colores'
    recommend curing the resin with a heat lamp?
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________