The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] First wholesale show  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Amery_Carriere
Date: Thu May 15 21:39:13 2008
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     Find a way to raise your table to counter height I saw this on a TV
>     show doing a buffet (cooking). He cut 4 pieces of PVC pipe of a size
>     that fit over each leg, and a length that made a tall table, and
>     then just slid one over each leg... 

    I have done this too- for my own tables. If you precut, you have to
    know exactly how the legs are configured. Are they in a "U" shape at
    the bottom- or do they go straight up to the table without any other
    table parts blocking them? Or- is there a hinge halfway up the leg?
    Also, you need to make sure you get the right PVC pipe- 1"? 1/2"? how
    thick are the legs? 

    If you're driving, I'd grab some different size PVC as well as a
    hacksaw and try it out at the show- we did that one year where
    counter heights were not available. But, they usually have counter
    height tables available- you can always ask. 

    There are also those "thingys" that college kids use to raise their
    beds some. They look like little plastic pots. The "pots" go upside
    down and the table or bed legs go on top of them so it's perched on
    them. It gives some height- not too much. I think the most I saw was
    1 foot. 

    You can also build a platform to go on top of the table to raise
    your display. Close the front and sides, and leave it open in the
    back and you can store your order forms, extra inventory under it.
    This will probably take the most planning, but I've seen it done
    really well and it can look very custom and professional. 

Amery Carriere Designs
Romantic Jewelry with an Edge
www.amerycarriere.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project