The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Flexshaft vibrating in the shaft itself  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Peter W . Rowe
Date: Thu May 15 20:19:31 2008
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Something else you can check. Sometimes, if the coupling of the inner
    shaft to the motor shaft is placed wrong, the tabbed end that couples
    to your handpiece can be either too far out of the sheath, or not
    extending out far enough. In one case, the handpiece puts the shaft
    into a compressed state, which not only isn't so good for the
    handpiece (can make some of them run hotter than usual, by loading
    the bearings more), but can make the inner shaft buckle a bit within
    the sheath as it runs, which can cause a vibration. If the tabbed
    end seems to extend farther from the sheath than it needs to in order
    to properly engage and drive the handpiece, check to see if it can
    mount further up on the motor shaft. 

    If the inner flex shaft is mounted too close to the motor, and not
    enough of the tabbed end engages the handpiece, then this too can
    make it not run smoothly, especially if the tab jams into the end of
    the handpiece without fully engaging the slotted coupling. The
    instructions that came with your flex shaft should describe the
    appropriate distance that the tabbed end should extend from the
    sheath, or you can simply judge it by eye from looking at the
    handpiece and seeing about how far it needs to extend. it's not a
    super critical measurement, but it does have to be in the right
    general area for the shaft to run smoothly. 

cheers
Peter
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project