[Jewelry making - Article 00459] - Re: [Orchid] Red vitreous enamel on copper

[John Donivan]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     If your color is transparent, the color of the copper, will always
>     show through the layers and therefore if you are using red, the
>     color will not end up red. 

    I've only played with enamels a bit - no expert. A different tack,
    though: Have you considered bypassing all the grief and just
    using.999 silver when you need red? 

http://www.donivanandmaggiora.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________