[Jewelry making - Article 00374] - Re: [Orchid] Laser printer for PnP blue

[Chris and Sandy Boothe]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    We regularly run PnP through the Office Max copiers. But we don't
    ask anybody, we put it in the bypass tray that pulls down on the
    left. We usually forget which side gets printed so we do a few
    practice runs with white paper, marking the "up" side so we know
    which side will get printed on and checking contrast and overall
    print quality. The do-it-yourself machines have settings that are
    pretty intuitive--when you're ready to print on the PnP, set the
    machine for transparencies. We don't make any secret of it but no one
    has ever asked us what that blue stuff is that we're running through
    the machine. 

Chris and Sandy Boothe
www.ringsforever.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________