[Jewelry making - Article 00330] - Re: [Orchid] Laser printer for PnP blue

[Alma Rands]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Rachel, I recently gave a workshop on PNP etching and ran into the
    same problem you have. Lazerquick refused to do the photocopying as
    they now have the new copiers that run too hot for the PNP.
    Fortunately, one of the participants in the workshop was kind enough
    to let us use the copiers in her office, so that problem was solved.
    In the meantime, I learned that Staples carried a small portable
    Canon laser copier for about $75,and best of all offered a $45.00
    rebate. Everyone in the workshop rushed out to purchase
    one--including me. I am happy to report that they work just fine
    with the PNP. You might check with Staples to see if they still have
    the Canon portable copiers. Even without the rebate they are a good
    buy. and as they run slowly, don't heat up so there is no fear of
    melting the PNP. 

Alma Rands
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________