[Jewelry making - Article 00328] - Re: [Orchid] Engraving characters

[Mary Elizabeth]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi,

    If you are willing to start over from a wax model, cad-cam might be
    the way to go. I have a cad-cam milling machine that could do this
    work quickly, but only on wax. Otherwise, you would have to find an
    engraver. My charge for work of this type would be roughly $125-150
    for the wax. (Including labor and running time etc... Only add for
    express shipping should you need it.) 

thanks and good luck!,
Mary Elizabeth
Blue Star Wax Carving
206-914-4052
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________